Skip to Content

PHP

The PHP l(Pressure Hull Penetrator) is used to run an electrical cable through a pressure hull and to form a pressure-tight unit with the pressure hull against overpressure media through the cable if the cable on the high-pressure side has been damaged or cut.
The test pressure is 90 bar.

90 Bar
90 Bar
PHP

  • Custom designed
  • Pressure tested up to 90 bar
  • Tested and inspected acc. to specification
  • EMP-version available

The PHP longitudinal cable joint is used as protection against incoming overpressure media/water through the pressure hull, vessels or barriers via the cables which have been damaged or cut. Application dimensions and cable types for the PHP are decided by the customer. Generally the PHP provides the same requirements as the cable. PHP penetration are currently used in both submarines and oil platforms. Metal parts can be supplied in different materials according to customers requirement.

Two types of LSJ are available:
LVT Longitudinal sealed (The basic type of PHP).
When a cable on the high pressure side (HP) is cut off, PHP stops incoming water and protects the low pressure side (LP) from over pressure and water.

LVTT Longitudinal and cross sealed
If one or more of the cables on the HP side are damaged or cut off, these cables will be blocked, while the un-damaged cables are still intact.

Both types (LVT and LVTT) can be supplied with builtin protection against EMP (electromagnetic pulse due to lighting and nuclear blast).

 

 

Typical technical data (acc. to customer demands)

Hydrostatic pressure: Test pressure: 9 MPa (90bar) or acc. to specification.
Shock: Mechanical: 2000 g acc. to IEC 60068-2-27
Work temp. range: Min. -40°C , Max. +70°C
EMP: Peak 1 kA, raise and fall time 30 ns
Longitudinal seal: Min. 10-6 cc/s air with 1 bar diff

 

Following testing and inspections are available upon request
• Dimension and visual inspection
• Radiographic examination of moulding
• Leak detection test
• Hydrostatic pressure test
• High voltage test
• Insulation resistance test
• Conductor continuity and function test
• Result verification and inspection report/certificate
• Or other tests specified by the customer

High pressure seals

RGPH

High pressure sealing for cables and pipes

See more

LSJ

Longitudinal sealing joint

See more

Encapsulation

Encapsulation of sensor and connectors

See more

RGPM

Pressure sealing for cables and pipes

See more

Read more

SR cable gland
At Sea

SR cable and pipe seals

The SR glands is designed to seal cables or pipes between 4 and 100 mm (0.16 and 3.94”) diameter.

Read more
X-series cabinet seal
At Sea
On land

X-series cable transit

Lightweight snap-fit cable seal

Read more
At Sea
On land

Blanking Plate

Seals frame prior to block installation

Read more