Skip to Content

E-RGSFB

E-RGSFB is for bolting. The bolted transit can be used in areas where welding is prohibited, or when the stress level induced by welding is unacceptable.
For installations where cables are already in place, specify RGSFBO which has a removable end.

The system consists of a frame, rubber blocks and a compression unit.
The frame is bolted to a marine structure and packed with rubber blocks suited for each cable and pipe dimension. The compression unit is inserted to compress the rubber blocks against cables and pipes to establish a tight seal. 

 

Bolted
Bolted
A60 H120
A60 H120
6 Bar
6 Bar
IP66/68 Nema250
IP66/68 Nema250
EMC
EMC
G&B
G&B
RGSF EMC multi cable transit

Benefits of MCT Brattberg E-systems

  • Protects against electrical and magnetic interference (EMI), “bugging”, electronic sabotage (SEMP) and static electricity (ESD).
  • Assists cable management.
  • Integral earthing between cables and wall screen.
  • Also seals the penetration against the passage of fire, water, gas, sound and environmental hazards.
  • Special E-Series for Grounding and Bounding
  • System can be dismantled and re-used.

Technical specifications 

E-RGSF is a standard E-RGS transit with a flange that allows the frame to be welded into a hole which is slightly larger than the frame.
E-RGSF comes in the four standard sizes, 2, 4, 6 and 8, and has the standard measurements of the E-RGS, but with the added width of the flange: 60 mm (2.36”) wide and 10 mm (0.39”) thick. E-RGSF can also be installed in multiple frames.

E-RGSFB transit are supplied in kits, complete with drilled holes, bolts, nuts, washers and a gasket or sealing compound. The flange is 60x10mm. (2.36”x0.39”).

Standard frames come in four sizes: 2, 4, 6 and 8. They are all the same width. Height differences are shown below. The material is 10 mm thick.

The EMC secret is a tempered metal sheet which systematically stops electrical current from passing along the cable screening through the seal and successfully function as an extended wall screen. 

  • All dimensions are exactly the same for the standard MCT Brattberg components.
  • All Insert Blocks are marked with yellow marking (see instructions).

RGSF Sizes

E-RGSFB Sizes

Standard frames come in four sizes:
2, 4, 6 and 8. They are all the same
width. Height differences are shown
below. The material is 10 mm (0.39”) thick.

 

Weight

E-RGSFB Weight Steel
E-RGSFB Weight Stainless
E-RGSFB Weight Aluminum

Performance

Maritime resistance to fire: 
Class A0, A60, H0, H60, H120 - IMO FTP Code 2010
(For more info see Certificates)

Water-tightness:
6 Bar water pressure load for 60 minutes - DNVGL-CP-0165 

Gas-tightness:
4 Bar air pressure load for 30 minutes - DNVGL-CP-0165  

Enclosure degree of protection Nema 250:
3R; 4X; 12 - Nema 250-1st

Enclosure degree of protection IP: 
IP65; IP66; IP67; IP68 2 meters 60 min - IEC 60529

Resistance to jet fire:
RGSbtb- J120 & JF 
RGS - J60 & JF 
(Contact MCT Brattberg for application details)

 

Data

Trade name: 
MCT Brattberg RGSF multi cable/pipe transit system

Variations: 
See TECH SPECS

Working temperature:
 -60 to +70 degrees C

Lycron data

Read Lycron data sheet:
Data sheet Lycron


Lycron is halogen free and flame retardant.

 

For all approvals, please also see Certificates 

Instructions

EMC

  • All dimensions are exactly the same for the standard MCT Brattberg components.
  • All Insert Blocks are marked with yellow marking (see instructions).

Grounding and Bonding

  • For grounding & bonding applications standard presswedge or endpacking is sufficient. 
  • Series RGS, RGB, RGG, and E-RGP These products are primarily intended for grounding and bonding of communication, instrument, power, braid or wire armored cables and copper pipes, up to max. 1 AWG.
  • Plugs and Wraps are only for use in Grounding and Bonding applications, not EMC.

Correct and safe installations

To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.

For more information, please view following instructions, videos or download manuals as PDFs.

Bolting

  • The Stainless steel bolts A4 M12 recommended torque value is 76 Nm.
RGS EMC Installation

Download pdf instructions 

For more information visit Documents & instructions

Multiple frames

HORIZONTAL MULTIPLE FRAMES

Horizontal multiple frames are described by listing the frame type and size x the desired number of horizontal openings.
Designation (starting at bottom):
Frame type 6x4

VERTICAL MULTIPLE FRAMES

Vertical multiple frames are described by listing the bottom frame type and size + the next frame type and size.
Designation (starting at bottom):
(frame type) 6+6+4 and (frame type) 6+4+2


VERTICAL AND HORIZONTAL MULTIPLE FRAMES

List the entire vertical frames x the desired number of horizontal repetitions.
Designation (starting at bottom):
(frame type) 6+4+2x4


NOTE: All multiple frame designations must be preceded by the frame type.

NOTE: All multiple frame designations must be preceded by the frame type.

EMC and G&B Insert Blocks

E-Standard Block

E-Standard Block with EMC and G&B capabilities

Read more

E-Addblock

E-Addblock with EMC and G&B capabilities

Read more

E-Spareblock

E-Spareblock with EMC and G&B capabilities

Read more

Components

E-PTG Presswedge

The Presswedge with EMC and G&B capabilites compresses the system and completing the seal.

Read more

E-STG Endpacking

Installed between compression plate and the top of the frame, completing the seal.

Read more

Lubricant

MCT Brattberg Lubricant for easier and safer installation.

Read more

Stayplate

To be placed between each row of blocks.

Read more