RGG-OK On land
-
Mounting gasket and hardware available
-
Applicable on core-drilled holes
-
Openable and retrofit
Overview
RGG-OK
- Type approved cable transit for buildings
- Can be casted in concrete
- Assists cable management
- Seals the penetration against the passage of fire, water, gas, sound and environmental hazards
- Unlike other brands our system can be dismantled and re-used
- Marked cable designation on blocks for increased safety
- No adaptation of standard blocks needed
RGG-OK frame type can be bolted onto concrete, plaster board wall or casted into a concrete wall or floor to protect against flooding, water and ingress.
The transit is made of two angle bars 60x6 and two gables in galvanized mild steel.
The standard height varies with the sizes - 2, 4, 6 or 8 (internal width 120.5 ± 1). Can be installed in horizontal combinations.
Please see information drawings for detailed data.
RGG-OK have removable ends which enables installation where cables already have been pulled.
For size and weight please see tables in the MCT Online Catalogue:
Performance
Resistance to fire:
Enclosure degree of protection Nema 250:
3R; 4X; 12 - Nema 250-1st
Enclosure degree of protection IP:
IP65; IP66; IP67; IP68 2 meters 60 min - IEC 60529
Lycron data
Read Lycron data sheet:
Data sheet Lycron
Lycron is halogen free and flame retardant.
For all approvals, please also see Certificates
Correct and safe installations
To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.
For more information, please view following instructions, videos or download manuals as PDFs.
Download pdf instructions
Multiple frames
HORIZONTAL MULTIPLE FRAMES
Horizontal multiple frames are described by listing the frame type and size x the desired number of horizontal openings.
Designation (starting at bottom):
Frame type 6x4
Insert Blocks
Handiblock
Newly developed Insert Block that provides greater flexibility, simple and safe installation.
Read more
U-Block
The U-Block is used to convert the external dimensions of Insert Blocks, AddBlocks and Spare Blocks to the next modular size.
Read more
Spareblock
The unused space in the frame is filled with solid spare blocks. Using the spare blocks allows the option of fitting new cable in the future.
Read more
Components
STG Endpacking
Installed between compression plate and the top of the frame, completing the seal.
Read more
Installations
Examples of installations on different sites: