Skip to Content

MSR cable glands At Sea

  • Pressure tested up to 5 bar
  • MED Modular B approved for use in cruise liners & passenger vessels
  • Each gland accommodates a range of cable diameters
  • No additional parts or on site machining required
  • Gland manufactured from stainless steel
  • Housing/body manufactured in primed mild steel
  • No welding required
5 Bar
5 Bar
A60 Lloyds
A60 Lloyds
No welding required
No welding required
MSR cable gland

The MSR glands are designed to seal up to 8 cables between 4 and 32 mm (0.16” and 1.26”) diameter.
And pipes between 4-30 mm.

The nut on the standard housing is respectively
 Material housing nut
MSR 20 M20 BSP style locknut Brass
MSR 40 M40 Nickel plated brass
MSR 50 M50 Nickel plated brass
MSR 63 M63 Nickel plated brass

Component parts: Seal, Housing, O-ring, Washer & Lock Nut.

Material
Housing Electro-plated mild steel for shelf life anti rusting.
Housing Washer Zinc plated mild steel
Seal High grade silicone (red)
Seal hardware Stainless steel 316
O-ring NBR - 10 year service life (EPDM is optional for longer service life)

 

Dimensions in millimeter and inches. Weights in kilograms and Oz.
Alternative cable configurations can be manufactured to suit specific customer requirements.

Correct and safe installations

  • The seal is easy to install. Just remove the center core and minimize the number of rings to enable cables to pass through. When all cables are inserted into the gland simply tighten the four Hex Screws equally. Once complete the seal will provide an effective barrier against fire, water, dust, vermin etc.
  • No welding is required.

For more information, please view following instructions, videos or download manuals as PDFs.